Polyment 22lbs Silicone Rubber Type 12 White Shore 30 Super Load

Description

Polyment 22lbs Silicone Rubber Type 12 White Shore 30 Super Load
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Polyment silicone rubber type 12 white Shore 30 super resilient
Addition-curing 2-component silicone rubber that vulcanizes at room temperature (RTV).
You get the silicone in high-quality plastic squeeze bottles with a dosing cap.
This makes removal very easy and clean.
Exact dosing is effortless, as you know it from, for example, comparable food packaging
and represents a significant improvement on the otherwise common tinplate cans or wide-neck bottles.
Properties and application:
- easy processing
- Problem-free mixing of the components 1: 1 by weight
- very good flowability, mixture is easy to pour
- Crosslinking to form resilient, rubber-elastic vulcanizate without heat of reaction
- high tear resistance and very high flexibility
- very high level of detail in the reproduction
- very long pot life and hardening time for sufficient ventilation and processing times
- Whitish-neutral color as a basis for optimal coloring
- very good temperature resistance
- very good anti-stick effect
Further product information:
Color: white (component A) and white (component B)
Mixture: 1: 1 by weight
Specific weight: 1.1
Viscosity 5000 - 7000 cP
Mixing time at 23 degrees Celsius 1 minute
Processing time (pot life) at 23 degrees Celsius approx. 70-90 minutes
Hardening time at 23 degrees Celsius approx. 6-8 hours
Shore A hardness after 24 hours 30 ± 2
Breaking load 5.5 ± 0.2 N / mm²
Elongation at break 500 ± 30%
Tear strength 18 ± 1 N / mm
Reproduction detail: 5 micron
Dimensional change after 24 hours 0.05%
Application materials:
Water-soluble casting compounds: Xyrarock, Stewalin, Plastalin Super, Keraflott / Gips, Keramin, Alabit, modeling and model plaster, casting clay, cement, concrete
Solvent-containing casting compounds: polyester, epoxy and polyurethane resins (use of release agents to prevent embrittlement), glycerine soap, candle wax
That's how it works!
The last step is curing. Here the silicone has to be delivered in the time specified by the manufacturer, usually cure completely at 23 ° C. After the final hardening, the frame and the plasticine can be removed. With a soft silicone, the impression can be easily removed from the mold. If you have chosen a medium-hard silicone, cutting with a knife may be necessary. The resulting gap can be closed with the help of a rubber during later pouring. The hardened silicone mold can now be poured with various casting compounds. These differ again according to the selected silicone rubber type. These are e.g. ceramics, plaster, concrete, tin, food, etc.
1. Selection of the silicone type
2. Materials & preparation
4. Pour silicone
Curing & further processing
This makes removal very easy and clean. Properties and application: - easy processing - very good flowability, mixture is easy to pour - high tear resistance and very high flexibility - very high level of detail in the reproduction - very good temperature resistance - very good anti-stick effect Further product information: Mixture: 1: 1 by weight Specific weight: 1.1 Viscosity 5000 - 7000 cP Mixing time at 23 degrees Celsius 1 minute Shore A hardness after 24 hours 30 ± 2 Breaking load 5.5 ± 0.2 N / mm² Elongation at break 500 ± 30% Tear strength 18 ± 1 N / mm Reproduction detail: 5 micron Dimensional change after 24 hours 0.05%    Application materials:     That's how it works! 1. Selection of the silicone type   2. Materials & preparation   4. Pour silicone   Curing & further processing
Marke
Polyment GmbH
EAN
Nicht zutreffend
Maßeinheit
kg
Herstellernummer
nicht zutreffend
Herstellungsland und -region
Deutschland
Anzahl der Einheiten
10
Produktart
Silikon-Kautschuk