Polyment 44.1lbs Silicone Rubber Type 26 Food Lilac Soft Shore 1:1 DIY

Description

Polyment 44.1lbs Silicone Rubber Type 26 Food Lilac Soft Shore 1:1 DIY
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Silicone rubber type 26 food lilac soft Shore 26 1 to 1
DESCRIPTION
Polyment silicone rubber type 26 food lilac soft Shore 26 1: 1
Addition-curing 2-component silicone rubber that vulcanizes at room temperature (RTV).
You get the silicone in high-quality plastic squeeze bottles with a dosing cap.
This makes removal very easy and clean.
Exact dosing is effortless, as you know it from comparable food packaging, for example, and represents a significant improvement over the otherwise common tinplate cans or wide-neck bottles.
The silicone used has been tested with regard to its use with food and is safe for food and consumer goods according to § 5 Para. 1 No. 1 of the Food and Commodities Act.
It is therefore safe to use food as pouring materials (e.g. chocolate, marzipan, baking mixes, ice cream, etc.) in this form.
Properties and application:
- easy processing
- Problem-free mixing of the components 1: 1 by weight
- very good flowability, mixture is easy to pour
- Crosslinking to form resilient, rubber-elastic vulcanizate without heat of reaction
- Temporary temperature resistant up to approx. 260 ° C / 15min, 240 ° C / 1-2h
- high tensile strength and high flexibility
- very high level of detail in the reproduction
- Excellent non-stick effect for easy release of the models
- Used for the production of molds for food, baking molds, consumer goods and body molds
Further product information:
Color: lilac (component A) and white (component B)
Mixture: 1: 1 by weight
Specific weight: 1.25
Viscosity 5500 ± 450 mPas
Mixing time at 23 degrees Celsius 1 minute
Processing time (pot life) at 23 degrees Celsius approx. 25 minutes
Curing time at 23 degrees Celsius 360 minutes
Shore A hardness after 24 hours approx. SH 26 +/- 3
Breaking load 3.5 ± 0.2 N / mm²
Elongation at break 500 ± 20%
Tear strength 5 ± 1 N / mm²
Reproduction detail: 2 micron
Dimensional change after 24 hours 0.02%
TFC silicone rubber type 26 is very well suited for the production of demanding, elastic and hard-wearing shapes with pronounced undercuts.
The mold can also be used as a baking pan.
For this purpose, the mold must be appropriately preheated (tempered) during production.
It is possible to achieve a permanent temperature resistance of up to approx. To reach 240 degrees Celsius.
When used as a food form, the form must be sterilized accordingly.
If you would like such a baking pan, please contact us so that we can manufacture the form for you accordingly.
Polyment silicone rubber type 26 can be used to produce one-part or multi-part molds, for molding original models made of wood, glass, metal, plastic, wax, ceramic casting compounds.
You can also use Allen water-soluble casting materials such as relief casting compounds such as Stewalin, Plastalin Super, Keraflott or gypsum, Keramin, Alabit, modeling and model plaster, casting clay, cement, concrete, etc. to water.
Soap casting compounds (soap glycerine) for making your own soap or waxes for making candles are also possible without any problems, as is casting with casting resins (resin).
You should pretreat the mold with a release agent before pouring it, since casting resins can lead to embrittlement of the mold after repeated pouring.
TOP quality made in Germany, you will be amazed!
The silicone is brand new and can be stored for at least one year, NEW!
Book / guide
If you might be making your first attempts at mold making and would like to know the best way to go about it, we recommend the book Molding yourself.
Starter set
Alternatively, we have put together several starter sets so that you have all the things you need together and can get started professionally.
Mold making service
If you do not want to build the required molds yourself, we would be happy to offer you this service:
Send us an email with your requirements with pictures and dimensions of the object to be molded.
We will then create your individual offer for you.
Special hint:
When pouring low-melting metals, make sure the mold is absolutely dry. Treatment of the mold with the separating and flow agent talc is recommended.
That's how it works!
For the production of silicone molds, it must first be determined what you want to duplicate and what casting material the object will be made of. This is of great importance because there are different types of silicone with different degrees of hardness and flexibility. Heat resistance is also an important factor. Pay attention to the areas of application and the individual product properties of the silicones in the respective descriptions.
1. Selection of the silicone type
2. Materials & preparation
4. Pour silicone
Curing & further processing
DESCRIPTION This makes removal very easy and clean. Properties and application: - easy processing - very good flowability, mixture is easy to pour - high tensile strength and high flexibility - very high level of detail in the reproduction Further product information: Mixture: 1: 1 by weight Specific weight: 1.25 Viscosity 5500 ± 450 mPas Mixing time at 23 degrees Celsius 1 minute Curing time at 23 degrees Celsius 360 minutes Breaking load 3.5 ± 0.2 N / mm² Elongation at break 500 ± 20% Tear strength 5 ± 1 N / mm² Reproduction detail: 2 micron Dimensional change after 24 hours 0.02% The mold can also be used as a baking pan. Book / guide Starter set Mold making service Special hint: That's how it works! 1. Selection of the silicone type   2. Materials & preparation   4. Pour silicone   Cur
Marke
Polyment GmbH
EAN
Nicht zutreffend
Maßeinheit
kg
Herstellernummer
nicht zutreffend
Herstellungsland und -region
Deutschland
Anzahl der Einheiten
20
Produktart
Silikon-Kautschuk